14
PART 1
l
English
8.2.2.2 USALS positioner setup
Mounting of the antenna on USALS positioner is complicated job. In order to get the best performance of the system it should be installed by a
professional.
In “
Antenna Setup
” menu set Positioner to “
USALS
” and press
OK
button to enter to “
Antenna position
” menu.
n
Use
CH
p
/
q
to move up and down in the list
n
Use
Vol
t
/
u
to change the setting
Satellite
:
Select satellite position of which you would like
to setup
Transponder
:
Select reference transponder which should be used
for signal quality indication
My longitude
:
Set longitude of your location
My latitude
:
Set latitude of your location
Move
:
Highlight this item and press
t
button to turn dish
to the position corresponded to the selected satellite.
Press
u
button to stop dish
Reference position
:
Highlight this item and press
OK
if you need to turn
dish to reference position (0 degree position)
Signal Level and Quality
:
Show level and quality of signal for selected reference transponder. Adjust longitude and latitude of your location
in order to get maximum values of the Signal Level and Quality indicators
n
Press
EXIT
to go back to the previous mode