Strong SRT 6500, User Manual

Page: 16 / 31

15
PART 1
l
English
English
8.2.3 Channel Search
Press OK on ‘ Channel Search ’ in the Setup Menu. The following window will appear.
Set the Satellite, Tune Method, Transponder, Frequency, Symbol Rate, FEC and Function.
n
Use CH
p
/
q
to move up and down the list
n
Use Vol t / u to change the setting
Satellite Name : Choose from the list of satellites selected in
“
Antenna setup ” menu
Tune Method : Main options are:
“ Sat ” – receiver will search channels according to stored list of transponders.
“ Sat – NIT ” - receiver will search channels according to stored list of
transponders and in addition use network information. This mode allows you to
find all channels, even from new appeared transponders.
“
TP ” – this method is to search channels from one transponder.
“ TP – NIT ” – receiver will search channels from one transponder and in addition
use network information. This mode recommended if you want to search
channels of particular broadcaster only
Sub options are:
“Free” – receiver will search only Free To Air channels
“Free+Scr” – receiver will search for all channels
Transponder : Select index from the stored list
Frequency : Value of transponder frequency in MHz
Symbol Rate : Value of symbol rate in kSymbols Per Second
Polarity
: Horizontal / Vertical / Right / Left
FEC : Auto, 1/2, 2/3, 3/4, 5/6, 7/8
Function : Append / Delete / Change
AGC Signal : Indicates received signal strength level
8.2.3.1 How to search for channels
Highlight “ Tune method ” field and press OK . Receiver will start channel scan. Names of the found channels will be shown in the two columns:
for TV and Radio separately.
You can interrupt search process by pressing to
OK or EXIT button.
If you press OK button: search process will be interrupted and you can select one of the following options:
n
Save – to save all found channels
n
Unselect – to unselect some unwanted channels from the list. Use OK button to unselect channels and Vol
t
/
u
buttons to switch
between TV and Radio list. Once you finish – press EXIT button, select “ Save ” and press OK . Only selected channels will be stored in
the memory
n
Cancel – to cancel result of search. No channels will be stored in the memory
If you press EXIT button: search process will be interrupted and no channels stored in the memory.