Strong SRT 6350 CI, User Manual

Page: 14 / 26

PART 1 • English
10
On screen will appear keyboard. To delete current name of the group select Backspace (
t
) symbol
and press OK . To enter new name use
tupq
and OK buttons. Press RED button to save new
name or press GREEN button to discard changes.
5.1.3 Edit Channels
In this menu you can edit channel name, lock and delete channels.
Edit
Press RED button to edit name of the channel. On screen will appear keyboard. To delete current name
select Backspace (
t
) symbol and press OK. To enter new name use
tupq
and OK buttons. Press RED
button to save new name or press GREEN button to discard changes.
Channel name will be changed in all channel lists.
Lock
Lock function can be used in order to block access to some channels. Press GREEN button to lock/
unlock channel of your choice. Locked channel will be marked by “Lock” symbol. In order to watch
locked channel you will need to enter PIN code.
Channel will be locked in all channel lists.
Delete
Pressing Yellow button will mark selected channel to delete. To unmark channel select it and press
Yellow button again. Channel(s) will be deleted after you press Blue button. Be aware: after pressing
Blue button channel(s) will be deleted from all channel lists. To cancel delete operation you can
press
Exit button. Message “Do you want to save data?” will appear on screen. Press Exit to cancel
data save or OK to confirm data save.
5.2 Installation
The installation menu contains following sub-menus:
“Channel set-up” allow you to setup channels from selected satellites.
“Dish Set-up” allow you to setup configuration of your dishes.
“Edit satellites” allow you to edit predefined satellites and their transponders as well as
add new satellites.
“GOTO X setup” allow you to setup your location in order to use GOTO X type of positioner.
“System setup” allow you to configure system settings such as OSD language, video
output mode, time settings, software update over the satellite.
“Parental lock” allow you to define system PIN code and lock access to the menu.
5.2.1 Channel set-up
From this menu you can setup channels from satellite(s) in several modes, access to Dish setup
menu, Positioner setup (if used).
Satellite: move focus of the menu to this item. Press OK to display list of available satellites. Select
satellite of your choice and press OK . If satellite doesn’t exist in the list you should add it first using
“Edit satellites” menu.
Dish number: move focus of the menu to this item. Use
tu
buttons to select dish number to which
above selected satellite belongs to. Press OK button to enter to Dish setup menu (see 5.2.2). Dish
number “--” means that selected satellite do not belongs to any dish.