Strong SRT 24HY4003 User Manual Download Page 13

An updated schedule list will be shown.

5.0 MENU SETTINGS

5.1 Menu control (DTV mode)

Press 

MENU

 to enter the main menu. Press 

 

 to select an item. Press 

ENTER

 to enter the item. Press 



 

 and 

ENTER

 to select the submenus. Press 

MENU

 to exit the item.

5.2 Picture menu

Picture Mode

 

 Select the automatic picture control mode. Available choices are 

Dynamic, 

Standard, Mild

 and 

User

. In the 

User

 mode, settings can be changed for 

Brightness, Contrast, Colour, Tint

 and 

Sharpness

.

Colour Temperature

 

 Select the overall colour tone of the picture. Available choices are 

Cool, 

Medium, Warm

 and 

User

. In 

User

 mode, settings can be changed for 

Red, Green

 

and 

Blue

.

Aspect Ratio

 

 Select the aspect ratio (display proportions) according to your video signal 

type or preference. Available choices are 

16:9, 4:3, Just Scan, Zoom1

 and 

Zoom2

Note

: Some options may not be available under some sources.

Noise Reduction

 

 Eliminates noise in the picture. Available choices are 

Off , Low, Middle

 and 

High

.

MPEG NR

 

 Eliminates noise generated while creating digital picture signals. Available 

choices are 

Off , Low, Middle

 and 

High

.

5.3 Sound menu

Sound Mode

 

 Select your favourite sound mode for each input. Choices are 

Standard, Music, 

Movie, Sports

 and 

User

.

Bass

 

 Adjusts the lower frequency of the sound.

Treble

 

 Adjusts the higher frequency of the sound.

Balance

 

 Control the sound balance between the right and left loudspeaker 

(earphone).

Auto Volume

 

 Adjust the volume corresponding to the input audio level. Options are 

On

 and 

Off 

.

Surround Sound

 

 Turns on the Sound Retrieval System.

AD Switch

 

 Turn on the 

Audio

 description, you can activate the setting of AD volume. 

When turn on the audio description, a narrator will describe what is 

happening on the screen for blind or visually impaired viewers. (Only 

available in DTV mode.)

5.4 Channel

5.4.1 Auto Tuning (in DVB-T mode only)

First select the Tune Type by pressing 

 

 to select 

DVB-T, ATV

 or 

DVB-T+ATV

 (DVB-T to search digital 

broadcasts and ATV to search analogue broadcasts). Press 

 to continue. Press 



 

 

 to highlight 

the country that you want to install, then press 

ENTER

 to start searching.

9

English

Summary of Contents for SRT 24HY4003























Reviews: