Service Type
Select
DTV
to search DTV channels only,
RADIO
to search radio channels only
or
All
for a complete search.
It is recommended to use the default settings.
3.2 DVB-T installation
Terrestrial Setting
First select the Tune Type by pressing
to select
DVB-T, ATV
or
DVB-T+ATV
(DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press
to continue. Press
to highlight
the country that you want to install, then press
ENTER
to start searching.
NOTE:
If you have an active antenna, turn it on by following the instructions in
paragraph
5.4.5
and then repeat the scan.
3.3 DVB-C installation
Cable Setting
First select the Tune Type by pressing
to select
DVB-C, ATV
or
DVB-C+ATV
(DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press
to continue. Press
to highlight
the country that you want to install, then press
ENTER
to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and
off ers information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on
the remote control. Press
EPG
to bring up the EPG interface. The second bar from the top will display
the current date and time. On the list below, the channel you are currently watching will be highlighted.
Before you can view any EPG information, you have to 'activate' every channel for which you want to
view programme information. To do this, use
to select a channel, then press
ENTER
to confi rm.
To check programmes which will be broadcasted on a future date, scroll up to the date fi eld with
. Use
to select the date you want to check. Press
2
to scroll up to the top bar in the display, then press
to select the
Channel List
. The second bar will then display one of your available channels. Go to
the channel for which you want to view information using
. After a brief moment, the programme
information will appear. Use
to scroll through the time slots. Press
MENU
to exit the EPG menu.
4.3.1 Info
Press the
GREEN
button to show information about the selected programme.
4.3.2 Schedule
Press the
YELLOW
button to display the
Schedule List
. Press
to select an event, press the
RED
button
to delete an event.
4.3.3 Remind
Press the
BLUE
button to display a reminder menu. Press
to select an item and
to change the
setting. Press
ENTER
to add the reminder event to the schedule list.
8