Standard user guide
V51-00-V19 eng
-10-
Rights to changes reserved
2.6 Parameter table – Standard frequency inverter (program 0)
Par
No:
Function: Range: Defaults: Description:
1 Max. Frequency
0,0 - 400 Hz 50,0 Hz Frequency at max analogue input = (10V or 20mA)
2 Min. Frequency
0,0 - 400 Hz 2,5 Hz
Frequency at min analogue input = (0V or 0 / 4mA)
3 Acceleration
0,01 - 999 Hz/s 5,0 Hz/s Frequency increase in Hz per second
4 Deceleration
0,01 - 999 Hz/s 5,0 Hz/s Frequency decrease in Hz per second
5 V/F - curve
25 - 400 Hz
50,0 Hz Frequency at which the max output voltage is
obtained.
6 Boost
0,0 - 25%
5,0 %
Additional output in % of max. voltage
7 DC – beak current 0,0 - 25%
0,0 %
See section 2.7 for more information
8 DC – brake time
0,0 - 120 s
0,1 s
See section 2.7 for more information
9 Start frequency
0,0 – 8,0 Hz
0,5 Hz
See section 2.7 for more information
A Stop frequency
0,0 - 20,0 Hz
0,3 Hz
See section 2.7 for more information
B Current limit
50 - 150%
150%
See section 2.7 for more information
C TIP Frequency
0,0 - 400 Hz
10,0 Hz Frequency used for TIP mode and reference run
D Switch frequency 2,0 - 8,0 kHz
2,5 kHz See section 2.7 for more information
E Automatic
restart
(Auto-Reset)
0 - 4
0
0:
No Auto-Reset
1:
Auto-R. after 1 sec.
2:
Auto-R. after 10 sec
3:
Auto-R. after 30 sec.
4:
No Auto-Reset after
power up
F Display
readout 0-200
0
0 :
Output frequency
10:
Motor current
20:
DC link voltage
30:
Position 3 most signif.
31:
Position – With scroll
32:
Position 3 least signif
33:
Position only thousand
40:
Slip (Hz)
50:
Actual output
frequency
G Scale factor
0,001 - 1000
1,000
Scale factor for the readout value
H Relay function
0 – 99
0
See section 2.7 Par. H – Relay function page 15
J NPN – output /
DC - stop
0 - 120
101
See section 2.7 Par. J – Terminal 9 Function page 16
(max. load 200mA)
L Motor rev/min.
0-3.000
1.350
Motor rev / min at 50Hz
P Pulses
pr.
revolution
00,1 – 1000,00 50,00
Set up the encoders pulse no pr. Rev.
0* Reference signal
1 - 8
1
1:
0-10V/
potmeter
2:
0-20 mA
3:
4-20 mA
5:
0-20 mA, where 0-10V has the
highest priority
6:
4-20 mA, where 0-10V has the
highest priority
7:
Ramp generator
8:
0-10V Frequency input 2.
0-10V Voltage/Torque at input 3
X Not
flashing X* Normal flashing