Strobel VEB100-6, Mechanic'S Instructions

Page: 26 / 42

22
MA_VEB100-6_A2_180618_en
3.7
3.7.1
Plunger
Setting the plunger (Fig. 10)
A T T E N T I O N !
Switch off machine electrically.
The plunger should be placed centrically in the needle plate opening and 1 mm
left from the needle shaft center (Fig. 10). It should be in standstill just before
the needle penetrates the fabric, i.e. at a distance of the needle point of approx.
2 +0.5 mm.
With the cloth support arm being in its highest position the plunger should lift
the needle by approx. 0.2 mm. The cloth support arm should be close to the
stop screw.
Fig. 10