Build the Headboards
We need to build the two headboards at either end of the bunk bed. You will
find four corner posts, On the BOTTOM of the post they will be marked with
an end letter “L “ and “R” (left and right).
Select one left (L) post and place to the left, and one right (R) and place to the
right.
on each post, very important.
This indicates the top of each
post and the row of holes that accepts the side/ guard rails.
You will have five headboard inserts per headboard. These are colour coded at
the end in marker pen. In order from the top
Part 15 Red (see page 5, FIG 1 for fixings)
Part 14 White (see page 5, FIG 2 for fixings)
Part 13 Blue (see page 5, FIG 3 or 4 for fixings)
Part 14 White (see page 5, FIG 2 for fixings)
Part 13 Blue (see page 5, FIG 3 or 4 for fixings)
You will note a white chalk mark
THIS
MUST BE AT THE TOP AND FACING YOU.
NO
YES
Locating the Dowel Rods
To keep the bed from rattling all the dowel holes have
been slightly mis-drilled by a couple of mm. When you
push parts together the dowels will straighten and pull
together to ensure a tight fit. Whenever you locate a
dowel on the hole NEVER push it all the way in, leave it
so it is loose and can be aligned with the second locating
hole. Push them all the way in and they will not line up.