12
R&E Stricker Reha-Entwicklungen GmbH
Additional operating instructions Neodrives
Transport
Once the wheel is correctly attached to the frame,
the motor can be connected to the cable end that
leads to the battery. Make sure that the plug [15] is
correctly aligned with the socket [17]. The rounded
surfaces ([A] and [B]) must be aligned with each
other! Now fasten all cables and supply lines to the
bicycle frame again with cable ties and carry out a
final function test (
).
Fig. 15: Correct connection of cables
WARNING
Make sure that the cable is laid correctly, as
incorrect laying could result in the cable getting
caught in the brake disc, the drive or in the
spokes, which could cause the bike to lock up and
fall.
NOTE
In all your assembly work, be sure to follow
the instructions and specifications of the
manufacturers of the various components
attached to the wheel. This applies in particular to
the brakes, gears and quick-releases.
WARNING
Never mount the motor without the torque arm
[20] . This would result in a total loss (twisting
off of the cable). In this case, all guarantee and
warranty claims are void. (
).
NOTE
In addition to your repair tools, also carry 5 cable
ties with you in order to be able to securely fasten
any cables that may come loose during a trip.
9 Transport
NOTE
Special legal regulations apply to the transport
and shipping of lithium-ion batteries and must be
strictly observed.
The shipping of lithium-ion batteries is strictly
regulated. Therefore, take a defective battery
personally to your specialist dealer. Contact your
specialist dealer beforehand.
The legal transport regulations for taking
lithium-ion batteries with you may change annually.
Before starting a journey, enquire in good time
about the applicable regulations with the airline or
shipping company or your tour operator.
9.1 Transportation in vehicle
Always transport the handbike only when it is
disconnected. If necessary, detach the attachment
stand from the handbike. Secure all individual parts
against slipping. The batteries can be transported
in any position, as they are leak-proof batteries.
Only use your car for transport, not for storing or
keeping the battery.
NOTE
Remove the battery and the sMMI Connect from
the handbike to avoid damage during loading and
during the journey. Make sure that cable ends
cannot cause any damage to the handbike or your
car while driving.
10 Disposal and recycling
Electrical appliances, batteries, accessories
and packaging should be recycled in an
environmentally friendly manner.
Avoid taping parcel tape to the handcycle, as
adhesive residue is difficult to remove.
Dispose of all other components of your handbike
in accordance with the regulations of your region at
appropriate collection points or in household waste
(paper, cardboard, plastic packaging).
