Stricker Neodrives, Additional Operating Instructions

Page: 10 / 20

8
R&E Stricker Reha-Entwicklungen GmbH Additional operating instructions Neodrives
Battery and charger
remove it completely. Place the battery in a clean
place. Make sure that the socket [3] does not
come into contact with any metallic particles when
placing the battery (risk of contamination).( Fig. 8 ).
Fig. 8: Remove battery from battery rail
7.3 Charging the battery
Fully charge the battery before using it for the first
time. The charge level of the rechargeable battery
is generally 30 % at delivery. The rechargeable
battery can be charged in any state of charge
without this affecting its service life. The battery
reaches its maximum service life when it is
charged at an ambient temperature between 10 °C
and 30 °C.
Fig. 9: Connecting the charger
The battery [1] does not have to be removed
from the handpiece for charging, but can remain
attached. Pull the plug of the motor cable [7] out
of the socket. Insert the plug [9] of the charger into
the socket [3] on the battery. The correct alignment
and locking of the two parts is done automatically
by a magnetic lock. ( Fig. 7 ) ( Fig. 9 ).
Carry out the charging process according to the
instructions in the charger operating manual. Also
observe the notes on the charging process. Before
inserting the plug [9] into the socket [3], make sure
that both parts are clean and that there are no
metallic particles in them. If these are present, they
must be removed with a clean dry cloth. („ 5.1.2
Charging process “)
When charging the battery, follow the instructions
in the charger operating manual. Also observe
the safety and warning notes in „ 5.1 Safety
instructions for battery and charger “ & „ 7 Battery
and charger “.