Stricker CITY 7, Instructions Manual

Page: 19 / 36

Manual English V16/04 page 19
Connecting and disconnecting the backpedal brake
In order to push the wheelchair backwards the backpedal
brake can be disconnected.
Pull the connector button down and turn it 90° to keep
the brake disconnected.
To connect the brake again, turn the button back into its
initial position.
.
picture.19
Safety advice Before every ride check, that the brake is connected and the button is
snapped in. Never ride with pulled out connector button and disconnected brake!
If you used the brake to hard it could be happen that the brake is blocked.
Especially in the fastest gears. The solution is press the mountaindrive button at the
Right side and brake again.
13 Wheelchair requirements
The Hand-Bike can be attached to different types of wheelchairs.
The wheelchair has to be in perfect condition though.
Please do not use faulty wheelchairs with broken or repaired frames.
We suggest the use of wheelchairs with rigid frames, which are more stable than
foldable models.
The brakes of the wheelchair have to be in perfect condition to give an additional
brake possibility.
For maximum braking efficiency we suggest the use of wheelchair wheels with drum
brakes. Those wheels are available for most wheelchairs.
The brake levers for drum brakes can be attached to the handles, so that both hands can
stay at the handles while braking.
Despite the attached Hand-Bike, the wheelchair can be moved forwards and backwards
by pushing the wheelchair wheels.
Connector button for
backpedal brake