- Push with one leg towards the axle and carefully put it down.
STORAGE
- Store the machine in a dry and locked place, out of the reach of children.
- Before storing the saw for a long time, thoroughly clean and treat all moving parts with environmentally
friendly oil to extend the life of the saw and ensure easy operation.
Never use grease!
POSSIBLE FAULTS
Before any troubleshooting, switch off the machine, wait for the saw blade to come to a
complete stop and remove the plug from the electrical outlet.
After each fault has been rectified, return all safety devices to service and check their
functioning.
DEFECT
POSSIBLE CAUSE
REMEDY
The machine does not start
after switching on
Power failure
Checking the fuses
Fault on extension
cord
Checking the cable, do not use damaged cables
anymore
Engine or switch
failure
Have the engine or switch checked/repaired by an
authorized service center or have it replaced with an
original spare part
The cradle is not functional
The latch support is
not released
Release the support (3)
The machine stops during
sawing
The circular saw
blade is blunt
Replace the saw blade with a new one or have it
sharpened
Too much pressure
Let the engine cool down and work with lower
pressure
The workpiece is clamped
when moved forward or
backward
The circular saw
blade is blunt
Hold the workpiece and switch off the motor
immediately
Replace the circular saw blade
Burnt points in the cut area
The circular saw
blade is blunt
Replace the saw blade with a new one or have it
sharpened
The circular saw vibrates
The saw blade is
deformed
Replace the saw blade with a new one
The saw blade is
not correctly
mounted
Mount the saw blade correctly
The cradle return
mechanism does not work
The return spring is
cracked or worn
Replace the return spring
Braking effect too low
(braking time> 10 s)
Faulty brake
Have the switch checked/repaired by an authorized
service center or have it replaced with an original
spare part
Worn brake disc
Various causes
