![Strend Pro LCS700/400V Instruction Manual Download Page 63](http://html.mh-extra.com/html/strend-pro/lcs700-400v/lcs700-400v_instruction-manual_1384496063.webp)
- Fix the workpiece firmly. Use a joiner clamp or vice to fix the workpiece to be machined.
- Do not use any tools if you are under the influence of alcohol, drugs, medicines or other narcotic or addictive
substances.
- The machine is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children must be supervised to
ensure that they do not play with the machine.
4) USE AND MAINTENANCE OF THE POWER TOOL:
- In case of any problem during operation, before any cleaning or maintenance work, every time you move
or stop using the power tool, disconnect it from the power supply/mains! Never work with the power tool if
it is damaged in any way.
- If the power tool starts to produce abnormal sound or smell, stop working immediately.
- Do not overload the power tool. The power tool will work better and safer if you work with it at the speed
(rpm) it was designed for. Use the right tool for the job. A suitable tool will perform the work for which it was
made well and safely.
- Do not use power tools that cannot be safely turned on and off with its control switch. Using such a tool is
dangerous. A damaged switch must be repaired by a certified service center.
- Disconnect the power tool before making any adjustments, changing accessories, or servicing. This measure
will reduce the risk of accidental triggering operation.
- Unused power tool shall be kept out of reach of children and unauthorized persons. A power tool in the
hands of inexperienced users can be dangerous. Power tool shall be stored in a dry and safe place.
- Carefully maintain the power tool in good condition. Check the moving parts and their mobility regularly.
Check for any damage to the guards or other parts that may compromise the safe operation of the power
tool. If the tool is damaged, make sure it is repaired before use. Many injuries are caused by improper
maintenance of a power tool.
- Keep cutting tools sharp and clean. Properly maintained and sharpened tools make work easier, reduce the
risk of injury and their control is easier. Use of accessories other than those specified in the operating
instructions or recommended by the importer may cause damage to the tool and cause injury.
- Power tool, its accessories, work tools, etc. shall be used in accordance with these instructions and in the
manner prescribed for the particular power tool, taking into account the working conditions and the type of
work to be performed. Use of the tool for purposes other than those intended may result in hazardous
situations.
5) SERVICE:
- Have the power tool serviced by a qualified service technician, if needed. Only identical spare parts may be used.
This ensures that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR CIRCULAR SAWS
HEALTH AND SAFETY AT WORK
The use of circular saws can be dangerous if they are used improperly. Basic safety precautions must
be taken during use to avoid the risk of fire, electric shock and personal injury.
- If possible, the circular saw blades should be transported in a protective case.
- The machine must stand on a level, firm, and non-slip surface during operation and the machine's
immediate surroundings must be well maintained and free of waste, such as sawdust and shavings.
- Consider the effects of the environment:
•
Do not expose the machine to rain.
•
Do not use the machine in wet or humid environments.
•
Ensure that the work area is well lit.
•
Do not use the device near flammable liquids or gases.
- Never leave the circular saw unattended.
- Stand in the right working posture. Stand in front of the operator's side, frontally to the saw blade line.