equipment. Personal protective equipment like respirator, protective shoes with anti-skid sole, head wear or
ear protection decrease the risk of injury when used according to the work conditions.
- Try not to accidentally switch the el. tool on. Do not move the el. tool connected to the power or with a
thumb on the switch. Before plugging the tool in, make sure that the switch is in the “off” position. Moving
the el. tool with the thumb placed on the switch or connecting the plug into socket with the tool being
switched on can cause serious injuries.
- Remove all keys and maintenance tools when plugging the tool in. Such key or tool not removed from the
rotating part of the electric tool might cause injuries.
- Always have stable posture and keep your balance. Work in areas with easily reachable places. Never
overestimate yourself. Do not use the electric tool when tired.
- Wear proper clothes. Wear personal protective clothes. Do not wear loose clothes or jewellery. Make sure
that your hair, clothes, gloves or other part of your body would not get too close to the rotating or hot parts
of the el. tool.
- Connect the el. tool to the dust extractor. If it is possible to connect the tool to the dust extractor, make
sure it is done and used properly. Using such devices might decrease the risk caused by the dust.
- The work piece shall be firmly secured. When securing the work piece, use the clamp or vice.
- The device shall not be used by people (including children) with limited physical, sensory or mental abilities
or with the lack of experience, if they are not supervised or were not instructed to use the device by a person
responsible for their safety. Children shall be supervised so they will not play with the device.
4) USE AND MAINTENANCE
- Always unplug the el. tool in case of any problem during work, before each cleaning or maintenance, during
each transfer or after the operation! Never operate the el. tool if damaged in any way.
- If the tool makes an abnormal sound or smells weirdly, immediately stop the operation.
- Do not overburden the electric tool. Electric tool will work better and safer if being operated within designed
speed. Use the correct tool for its stated purpose. The suitable tool shall perform the work properly and
safely.
- Do not use the electric tool that cannot be switched on or off by the controller safely. The use of such tool
is dangerous. Damaged switch shall be repaired by an authorized service.
- Disconnect the device before the adjusting the tool, changing its spare parts or maintaining it. This should
limit the risk of accidental start.
- Keep the unused electric tool away from the children or unauthorized people. Inexperienced use of the
electric tool may be dangerous. Keep the electric tool at dry and safe place.
- Keep the electric tool in good condition. Check the moving parts and their movement regularly. Check if the
protective covers or other parts are not damaged, otherwise they may endanger safe operation of the electric
tool. If the tool is damaged, ensure its repair before the next use. Many injuries have been caused by
improper maintenance of the electric tool.
- Keep the cutting tools sharp and clean. Properly maintained and sharpened tools make the operation easier,
they prevent the risk of injury and work with them can be easily controlled. Using the tools other than
mentioned in the manual or recommended by the supplier might cause its damage and injury.
- Use the electric tool, accessories and work tools, etc. according to these instructions and in a prescribed
way for the specific electric tool, regarding the work conditions and kind of work. Use of a tool for purposes
other than it’s designed for might cause dangerous events.
5) SERVICE:
-
Please let the qualified person repair your electric tool with identical spare parts. This way you’ll secure the
same safety level of the electric device as before it’s repair.
SAFETY INSTRUCTIONS FOR SOLDERING GUN
- Before connecting the soldering gun to the power supply, make sure that the soldering tip is correctly
positioned and secured in the gun holder.
- Wear suitable protective gloves, free of synthetic materials, to protect against burns.
