background image

11

Health & Safety 

Please ensure you follow the health & safety guidelines below before you 

use the product.

• Study, understand and follow all information in this document before

operating this device.

• Do not exceed the maximum load of 680kg.
• Use only on hard, level surfaces.
• Always centre the load on the lift pads.
• Lift only on areas of the vehicle specified by its manufacturer.
• Immediately after lifting load, ensure the load is in balance and the

mechanical lifting mechanism is fully engaged with the lift point.

• Secure load with appropriate restraint device.
• Use of this product is limited to lifting, lowering, transporting and storing in

the lowered position. It is also limited to loads consisting of a single vehicle

whose lift points are compatible with the motorcycle jack. Incompatibility is

evident when the loaded motorcycle/ATV wobbles, appears unstable, and/

or does not securely engage the lift platform.

• Restraining an incompatible load will not make the load secure and may

cause unexpected loss of load.

• Never work on, around or under a load that is not secured and stable.
• Keep your and other people’s heads, hands and feet away from lift arms

when raising and lowering.

• No alterations should be made to this product.
• Only attachments and adapters supplied by the manufacturer shall be used.
• Failure to heed these markings may result in personal injury and/or

property damage.

Summary of Contents for SWMCJ















Reviews: