© Street Furniture Australia Pty Limited
ABN 46 070 910 100
Version 2 @ 25.06.21 MDP-07
streetfurniture.com
Australia
1800 027 799
United States
+1 415 365 7186
International
+61 2 8774 8888
2
N6 391 Park Road, Regents Park
NSW 2143, Australia
This technical pack is copyright and owned by Street Furniture Australia Pty Limited ACN 070 910 100.
You may download and use this technical pack in unaltered form only for installing and maintaining our
products. All rights are reserved. Any use of our technical pack for purposes other than for the above-
mentioned purpose, is strictly prohibited without the prior written permission of Street Furniture Australia
Pty Limited, Level 1, 52-58 William Street, East Sydney NSW 2011. Street Furniture Australia Pty Limited
reserves the right to make modifications to product specifications without prior notice.
© Street Furniture Australia Pty Limited 2013. All rights reserved.
1800 027 799
streetfurniture.com
PAGE
leg assembly guide
SEATING, BENCHES AND TABLES
02
Thank you for purchasing a Street Furniture Australia product.
Handling
Handle the seat(s) and/or table(s) and parts in a manner to prevent scratching, warping, bending
and twisting. Do not slide parts on concrete or other hard or abrasive surfaces.
Delivery
Please check you have received the below items. Missing or damaged parts need to be reported
to a Street Furniture sales representative.
Tools required for assembly
(
not included
)
7. Ratchet Drive Tool
6. 8mm Ball Point Hex Key
1. Assembled Seat/Bench/Table 2. Legs x2 (
Post Leg 05 is shown
) 3. Bolts x4 4. Dome Nuts x4
5. Washer x4
2
4
3
1
5
This technical pack is copyright and owned by Street Furniture Australia Pty Limited ACN 070 910 100.
You may download and use this technical pack in unaltered form only for installing and maintaining our
products. All rights are reserved. Any use of our technical pack for purposes other than for the above-
mentioned purpose, is strictly prohibited without the prior written permission of Street Furniture Australia
Pty Limited, Level 1, 52-58 William Street, East Sydney NSW 2011. Street Furniture Australia Pty Limited
reserves the right to make modifications to product specifications without prior notice.
© Street Furniture Australia Pty Limited 2013. All rights reserved.
1800 027 799
streetfurniture.com
PAGE
leg assembly guide
SEATING, BENCHES AND TABLES
03
RECOMMENDED INSTALLATION PROCEDURE FOR ALL STREET FURNITURE LEG TYPES
(SEE ALL LEG TYPES ON PAGE 8)
1. Take two of the bolts and place one
washer on to each bolt against the head of
the bolt.
2. Take one of the legs and turn it upside
down. Insert the two bolts with the washers
into the bolt holes as shown in the image.
3. Place the assembled seat/bench/table
upside down and on to a protected surface to
prevent scratching.
4. Place the leg over the axle, aligning the
threaded bolts with the holes on the seat
frame upper support.
1
2
4
This technical pack is copyright and owned by Street Furniture Australia Pty Limited ACN 070 910 100.
You may download and use this technical pack in unaltered form only for installing and maintaining our
products. All rights are reserved. Any use of our technical pack for purposes other than for the above-
mentioned purpose, is strictly prohibited without the prior written permission of Street Furniture Australia
Pty Limited, Level 1, 52-58 William Street, East Sydney NSW 2011. Street Furniture Australia Pty Limited
reserves the right to make modifications to product specifications without prior notice.
© Street Furniture Australia Pty Limited 2013. All rights reserved.
1800 027 799
streetfurniture.com
PAGE
leg assembly guide
SEATING, BENCHES AND TABLES
03
RECOMMENDED INSTALLATION PROCEDURE FOR ALL STREET FURNITURE LEG TYPES
(SEE ALL LEG TYPES ON PAGE 8)
1. Take two of the bolts and place one
washer on to each bolt against the head of
the bolt.
2. Take one of the legs and turn it upside
down. Insert the two bolts with the washers
into the bolt holes as shown in the image.
3. Place the assembled seat/bench/table
upside down and on to a protected surface to
prevent scratching.
4. Place the leg over the axle, aligning the
threaded bolts with the holes on the seat
frame upper support.
1
2
4
This technical pack is copyright and owned by Street Furniture Australia Pty Limited ACN 070 910 100.
You may download and use this technical pack in unaltered form only for installing and maintaining our
products. All rights are reserved. Any use of our technical pack for purposes other than for the above-
mentioned purpose, is strictly prohibited without the prior written permission of Street Furniture Australia
Pty Limited, Level 1, 52-58 William Street, East Sydney NSW 2011. Street Furniture Australia Pty Limited
reserves the right to make modifications to product specifications without prior notice.
© Street Furniture Australia Pty Limited 2013. All rights reserved.
1800 027 799
streetfurniture.com
PAGE
leg assembly guide
SEATING, BENCHES AND TABLES
02
Thank you for purchasing a Street Furniture Australia product.
Handling
Handle the seat(s) and/or table(s) and parts in a manner to prevent scratching, warping, bending
and twisting. Do not slide parts on concrete or other hard or abrasive surfaces.
Delivery
Please check you have received the below items. Missing or damaged parts need to be reported
to a Street Furniture sales representative.
Tools required for assembly
(
not included
)
7. Ratchet Drive Tool
6. 8mm Ball Point Hex Key
1. Assembled Seat/Bench/Table 2. Legs x2 (
Post Leg 05 is shown
) 3. Bolts x4 4. Dome Nuts x4
5. Washer x4
2
4
3
1
5
assembly instructions
A. HOW TO ASSEMBLE THE LEGS
1. Please check that you have all the components
Fig.1.
2. Make sure that you have the tools required
Fig. 2
.
3. Insert washers on two bolts
Fig. 3.
4. Turn a leg upside down and insert bolt with washer
Fig. 4.
Fig. 3
Fig. 4
Fig. 2
Your components:
1. Assembled Seat/Bench/Table
2. Leg x2
(your selected design)
3. Bolts x4
4. Dome Nuts x4
5. Washer x4
Note: The Post leg is shown in this example, however this assembly
method is applicable to all leg types.
Your tools (not inlcuded):
1. 8mm Ball Point Hex Key
2. Ratchet Drive Tool
Fig. 1
6
7