16
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
W: www.streamline.systems E: [email protected] T: +44 (0)1626 830 830
17
Filling the water tank on your Ecostream™
depending on what filtration specification.
When using the Ecostream™ with no filtration, is designed to be filled straight into tank lid and fast
filling with a transfer nozzle.
When using the Ecostream™ with DI filtration, you have the option of filling through the water inlet
port which is connected to a float or opening the tank lid and fast filling with a transfer nozzle.
How to assemble the system
Turning your ECOSTREAM
™
system on
No Filtration
DI Filtration
Your Ecostream™
does not have any filtration, therefore the operator MUST fill the tank with
pure (000ppm) water.
Important
i.
Switch the flow controller on by
pressing the
button
ii. You can adjust the water flow rate by
increasing/decreasing the flow rate
number until a desired flow rate is
achieved. The average flow rate is
usually set between 40-50 on the
Streamline® controllers (approx.
2.5lpm). The pump MUST run
continuously. If the pump is
running intermittently whilst water is
flowing to the telescopic pole, decrease
the speed on the flow controller by
pressing the
button until the
pump runs continuously.
You are now able to use your Ecostream™ system.
Please ensure you regularly check the water quality with the TDS meter provided.
Different cleaning applications may require different water flow rates, i.e. large glass areas
with lots of rinsing will need more water than a small window.
Important
ECOSTREAM
™
