4
Technical and Service - Ph: 1300 735 352 | Email: [email protected]
11
Button Install: Remove nut.
Nut
12
Insert buttons into the hole on the lid. Slide nut over the bottom
of the rods and tighten. Fill and check water. Replace lid and test.
13
Seat Install: Insert expansion plugs into holes in pan.
14
Screw in the post and gasket,
lightly
, into the plugs that have
been inserted into the pan. Rotate the hinges so the posts are
positioned approximately at 11 and 1 (as shown above).
15
Push seat onto the posts and close lid. Move the seat around
until it is square with the pan.
16
Remove seat from pan. Tighten screws to final tension. Slide
covers over seat mount. Replace seat on pan.
Please leave the instructions with the owner.
