6 Configuring the Network Settings
Streambox SBT3-9200 Installation Manual
16
3.
Select NET ADAPTERS, press
“ENTER”
.
4.
Select the network adapter you would like to configure,
(Intel Pro….rt) and press
“ENTER”
. The adapter names
represent the system’s naming convention for the
hardware used for each interface. The interfaces may
have different names due to hardware differences.
NOTE
: On multiple IP interface units, the first network
adapter in the list represents the interface on the left
side, closest to the power connection, and the second
represents the right interface.
5.
Use the “down” arrow to select SET STATIC and press
“ENTER”
to set the interface to static IP mode. Wait a
moment for the unit to make the change.
6.
After the unit is set to static mode, use the “up” arrow to
navigate the IP [ADDRESS] setting on the selected
interface and press
“ENTER”
.
7.
The IP address is shown in XXX.XXX.XXX.XXX format.
Change the IP address to reflect the desired value. Use
the arrow keys to move the cursor to the digit to be
adjusted. Each value may only be changed in its given
valid range. For example, the first digit of each octet
can have a value of 0 to 2. After selecting which value
is to be adjusted press
“ENTER”
. The next digit is
automatically selected. Continue the above steps until
the last digit is entered. After pressing
“ENTER”
on the
last digit, the IP address will be stored. If you need to
go back to change a value, press
“ESC”
.
8.
Select MSK [ADDRESS] to set the IP subnet mask and
press
“ENTER”
.
9.
Follow similar steps to set the subnet mask.
Summary of Contents for SBT3-9200
