Ecotech (Low Input) Issue 1.2 28/06/01
Page 7 of 7
Replacement of main injector
1. Repeat operations 1 - 5, as described for 'Replacement of gas tap/FSD/piezo igniter'.
2. Remove gas pipe from gas tap/FSD/piezo igniter to injector.
3. Unscrew injector and replace, making certain that the jet size stamping corresponds to
the specification on the Data Badge plate.
4. Reassemble in reverse order.
5. Turn on the gas supply and check for soundness.
Replacement of ignition & pilot assembly
1. Repeat operations 1 - 7, as described for 'Replacement of gas tap/FSD/piezo igniter'.
2. Disconnect
thermocouple
connection to the gas tap/FSD/piezo igniter.
3. Disconnect pipe from base of pilot burner.
4. Pull off connector on the base of the igniter probe.
5. Remove 2 screws on the burner and remove ignition unit complete.
6. Fit new pilot assembly and reassemble in reverse order.
7. Turn on the gas supply and check for soundness.
8.
Check operation of ignition system.
NOTE: No liability can be accepted unless this product has been installed and operated
strictly in accordance with these manufacturer's instructions
U.K. Registered Design 2040268. British Patent Application 9414887.1
Design right reserved © Legge Fabheat Ltd.
SPARE PARTS
When ordering spare parts please quote part numbers as listed below:
NATURAL GAS
L.P.G. (Propane)
Gas tap / FSD / piezo igniter
BV50023
BV50147
Oxypilot assembly
BA50004
BA50041
Injector
BI70800
BI70530
Back ceramic
BC11300
BC11300
Centre ceramic
BC11296
BC11296
Front ceramic
BC11295
BC11295
Set of 14 loose coals
BC50031
BC50031
