13
12
*Please note!
Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
d. Dispensing Hot Water
To dispense hot water, press
the marked top right button.
The dispensing will continue while the button is pressed.
Note:
When the hot water temperature is low, the hot water cup on the
display will be dimmed and dispensing will not be possible. When pressing
the hot water button, the hot water progress bar will advance, the water will
start to heat until it reaches the dispensing temperature. When the dispensing
temperature is reached, the color of the hot cup on the display will fill up.
e. Dispensing a Measured Quantity of Hot Water
To dispense a measured quantity of hot water, briefly press
the marked top left
button.
Pressing any button during dispensing will stop the action. It is not possible to
dispense a measured amount of hot water when child lock is on.
Note:
The dispensing a measured quantity of hot water function can be
canceled.
*Please note!
Due to variations in the water flow rate, the set quantity may vary. After dispensing it is
important to check that the required quantity was received (especially when preparing food for infants,
medications etc.). In the event of quantity variations, the required quantity can be redefined.
f. Dispensing Water with Child Lock
To dispense hot water with child lock it is necessary to simultaneously press
the
marked top left button
and also briefly press
the marked top right button.
The
dispensing will continue as long as the top left button is pressed. There is no
need to continue pressing the top right button during dispensing.
Hot Water Dispensing with Child Lock will Always be Accompanied by a Beep.
g. Boiling the Water
To heat the water to a temperature close to boiling, press
the marked left button.
When the button is pressed, the progress bar above the hot water cup will
advance, the water will be heated until it is near boiling, and the LED above the
button will start blinking. When the temperature is near boiling, the color of
the hot water cup on the display will fill up and the steam icon above the hot
water cup will be displayed instead of the progress bar.
h. Dispensing a Jug of Cold Water
To dispense a jug of cold water, briefly press the menu button. After moving
to the next dispensing menu, press
the marked right top button.
Pressing any
button during dispensing will stop the action.
PRESS ANY KEY TO STOP
Summary of Contents for bubbleX
Page 1: ...User Guide bubbleX...