Strauss water bubbleX, User Manual, Page: 14 / 22

27 26
6. Water Bar Maintenance & Periodic Care
a. Emptying the Drip Tray
It is important to empty the drip tray on time (before it fills up). Order of
operations for emptying the drip tray.
(1) Close the folding tray. Wait a few seconds for the leftover water to drain into
the drip tray.
(2) Gently pull the drip tray to remove it without spilling the water. The purpose
of the drip tray is to collect excess drops from the water bar, do not use it for
other purposes.
b. Filter and
UV
Lamp Replacement
To main the quality of water and the soundness of the water bar, be sure
to replace the UV lamp every 12 months, and the filter every 6 months or
2,000 liters, whichever occurs earlier. Replacing the parts is easy and simple and
detailed replacement instructions are attached to the replacement lamps and
filters.
Prior to replacing the parts, read the attached instructions.
Note - The purification process is internal and protected. The water bar is
equipped with a mechanical mechanism that prevents turning on the lamp
outside its defined position.
Caution! UV-C radiation is hazardous to the eyes and skin.
c. Filter Replacement Instructions
1. Removing the filter:
Remove the water bar’s top cover.
Press the
PUSH
button and pull the filer upwards using the extraction ribbon.
2. Inserting the filter:
Remove the wrapping from
the new filter. Insert the new filter until you hear a click.
3. Water Dispensing:
Place a container beneath the dispensing spout.
Dispense about 4 jugs of cold water until a regular flow
is achieved.
4. Air Purging
: Enter the AIR PURGING sub menu.
MENU MAINTENANCE AIR PURGING
To start the purging process, press the button and wait for the process to
complete. Press to return to HOME SCREEN
Warning!
Do not dispense hot water
while replacing the filter.
d. Displaying and Resetting the Filter Replacement Timer
This option enables showing the time till the next filter replacement on the display;
and resetting it if necessary. To display or reset the filter replacement timer, enter
the FILTER REPLACEMENT sub menu.
MENU MAINTENANCE FILTER REPLACEMENT
The number of days till the next filter replacement will appear on the display.
To reset the filter replacement timer, press . To confirm, select YES using the
top right and bottom right buttons. To confirm, press the button.
e. Lamp Replacement Instructions
1. Removing the lamp:
Remove the water bar’s top cover.
Pull the lamp gently upwards. A message will appear on the display to install a
new lamp.
2. Inserting a new lamp:
Remove the wrapper from the new lamp, avoid
touching the glass body of the lamp.
Insert the new lamp into the water bar. Select NEW LAMP.
3. Lamp successfully installed
The message UV LAMP INSTALLED
SUCCESSFULLY will appear on the display.
Warning!
Do not use the UV lamp when
it is out of the water bar as
dangerous UV-C radiation may
affect your eyes and skin.