Preface
x
Stratus ftServer V 2302, V 4304, and V 6308 Hardware Installation Guide
(R003S)
Commenting on the Documentation
To provide corrections and suggestions on the documentation, send your comments in
one of the following ways:
By clicking the
site feedback
link at the bottom of a Help topic. Information to
identify the topic is supplied in the StrataDOC Web Site Feedback form.
By email to [email protected]. If it is possible, please include specific
information about the documentation on which you are commenting:
– For a printed document or a document in PDF format, include the title and part
number from the Notice page and the page numbers.
– For online documentation, include the Help subject and topic title.
If you are connected to an OpenVOS system, you can comment on this document by
using the command
comment_on_manual
. To use the
comment_on_manual
command, your system must be connected to the RSN.
The
comment_on_manual
command is documented in the document
OpenVOS
System Administration: Administering and Customizing a System
(R281) and the
OpenVOS Commands Reference Manual
(R098). There are two ways you can use this
command to send your comments.
If your comments are brief, type
comment_on_manual
, press
<Enter>
or
<Return>
, and
complete the data-entry form that appears on your screen. When you have
completed the form, press
<Enter>
.
If your comments are lengthy, save them in a file before you issue the command.
Type
comment_on_manual
followed by
-form
, then press
<Enter>
or
<Return>
. Enter
this document’s part number,
R003S
, then enter the name of your comments file in
the
-comments_path
field. Press the key that performs the
CYCLE
function to
change the value of
-use_form
to
no
and then press
<Enter>
.
N O T E
If
comment_on_manual
does not accept the part number
of this document (which may occur if the document is not
yet registered in the
manual_info.table
file), you can
use the
request of the
maint_request
command
to send your comments.
Your comments (along with your name) are sent to Stratus over the RSN.
