Stratus ftServer 2600, Site Planning Manual

Page: 43 / 98

Grounding Requirements
Electrical Power Planning
2-15
Grounding Requirements
W A R N I N G
!
Incorrect grounding can cause severe personal injury
and extensive equipment damage.
The ftServer system obtains its protective earth (PE) ground through the power cord.
See “Grounding Considerations” on page B-1 for a more complete discussion of
ftServer system grounding.
Table 2-13. Power Cords to Connect PDUs Directly to AC Power Mains
Marketing ID Plug Type Rating Length Locale
B50154F IEC 60320 C19 to IEC 60309 20A/250V 15 ft International
B50171F IEC 60320 C19 to NEMA L6-20P 16A/250V 15 ft North America
B50175F IEC 60320 C19 to NEMA L6-20P,
PSE approved
20A/250V 15 ft Japan locking
power cord
Table 2-14. AC Power Cords to Connect PDUs to a UPS
Marketing ID Plug Type Rating Length Locale
B50171F IEC 60320 C19 to NEMA L6-20P 16A/250V 15 ft North America
B52700F-45M IEC 60320 C19 to IEC 60320 -C20 20A/250V 4.5m International
B50175F IEC 60320 C19 to NEMA L6-20P,
PSE approved
20A/250V 15 ft Japan locking
power cord
Table 2-15. System Power (Jumper) Cables to Connect ftServer Systems to PDUs
Marketing ID Plug Type to System Plug Type to PDU Rating Length
B50502F IEC 60320 C13 IEC 60320 C14 10A/250V 2.0m
B50503F IEC 60320 C13 IEC 60320 C14 10A/250V 2.0m