Stratus ftServer 2600, Site Planning Manual

Page: 25 / 98

Safety Notices
Site Planning for ftServer 2600, 4500, and 6300 Systems
1-13
W A R N I N G
!
When installing a system or CRU, always connect the
power cord first, before adding communications
cables. The power cord contains the protective earth
connection; it should be connected first and
disconnected last, to maintain a grounded chassis.
Before attempting to remove a CRU from the system
chassis, make sure to power off the CRU, disconnect
communications cables, and then disconnect the
power cord.
Never connect a power cord to a CRU when it is not
located within the system chassis.
W A R N I N G
!
Do not disassemble, repair, or alter the server, except
as described in the Stratus ftServer 2600, 4500, and
6300 Systems: Operation and Maintenance
Guide (R639). There is a risk of an electric shock or
fire as well as equipment malfunction if you do not
observe the instructions in the Stratus ftServer 2600,
4500, and 6300 Systems: Operation and Maintenance
Guide (R639).
W A R N I N G
!
Do not place any object on top of the server. The
object may fall off and cause injuries, damage to
hardware, or a fire.
W A R N I N G
!
Do not leave the DVD tray ejected. Dust may enter the
equipment and cause it to malfunction. The ejected
tray may also become a cause of injuries.