INSTALLATION WITH LOREX / SYLVANIA OBSERVATION SYSTEM CAMERAS
1. Insert camera cable through the cable outlet of the sunshade housing and attach the camera cable to the 6
DIN input located at back of the camera.
2. Hold the sunshade housing facing you and slide the camera between the side groves into the housing. While
holding the camera from inside the housing, reverse the housing and use the supplied mounting screw and
washer to attach the camera to the housing through the camera mounting hole. See diagram below.
3. Attach the camera stand (supplied with the camera) to the Bracket Mounting Hole of the accessory sunshade
housing. Mount the sunshade housing to desired place with supplied camera stand mounting screws.
Metal Stand
(Included with Camera)
Washer
Sunshade Housing
Side Groves
LOREX / SYLVANIA
INSTALLATION WITH OBSERVATION SYSTEM CAMERAS USING A SPACER
1. Insert camera cable through cable outlet of the sunshade housing and attach the camera cable to 6 DIN input located
at back of the camera.
2. Hold the sunshade housing facing you and slide the spacer between the side groves into the housing. Place the camera
on top of the spacer and reverse the housing upside down by holding the camera inside the housing tight. Use the
supplied mounting screw and washer to attach the camera to the housing through the camera mounting hole. See
diagram below.
3. Attach the camera stand (supplied with the camera) to the Bracket Mounting Hole of the accessory sunshade housing.
Mount the sunshade housing to the desired place with supplied camera stand mounting screws.
Metal Stand
(Included with Camera)
Spacer
Sunshade Housing
Side Grooves
Distributed By:
Strategic Vista Corp.
300 Alden Road, Markham, Ontario Canada L3R 4C1
FOR INFORMATION:
www.strategicvista.com
Because our products are subject to continuous improvement, SVC reserves the right to modify product designs and specifications without notice and without incurring any obligation. E. & O.E.
