Stratasys Objet24, Operator Training Manual, Page: 3 / 236

Safety Procedures
Hot Surface
Risk of burns from:

Block
– 70°C

Heads - 75°C

UV socket
Do NOT touch these surfaces while they are hot.
High Voltage

Main Power Supply

UV Power Supply

UV Lamp Connectors

X-Axis Power Supply

Printer Computer Power Supply
Risk of Electric Shock
Ultra Violet
Radiation
Radiation from UV Lamps
Always use protective eyewear when the printer cover is open.
Manufacturer : UN process supply INC.
No : I005-017orange
Moving Parts

4 Moving Axes - X axes, Y axes, Z axes ,T axes (wiper)

UV Fans

Pumps
Handling
Printing
Materials

Printing materials (resins) are flammable
– Do
not expose them to flames, heat or
sparks.

Keep resins away from food and drink.

Uncured resin is toxic - minimize direct contact with the skin to prevent irritation
and other health hazards. Prolonged contact may cause burns.

Always wear protective gloves.
First Aid for
Working with
Resins

If respiratory irritation occurs, expose the victim to fresh air immediately.

If uncured resin comes in contact with the eyes, flush immediately with large
amounts of water for 15 minutes and seek medical attention.

When handling resins or material containers, wear protective goggles to
prevent uncured resin from splashing into the eyes.

If uncured resin comes in contact with the skin, wash the area immediately with
soap and cool water.
General Safety
Rules

Be familiar with the locations and use of safety equipment.

Do not use broken equipment. Machinery with moving parts must have a working
safety interlock, and a protective cover over the moving parts.

Do not open the cover while printer is operating.
If open, do not stare at the UV light and use protective eyewear to prevent exposure to
UV light.