Stratasys Objet24, Operator Training Manual, Page: 218 / 236

33 STRATASYS / FINISHING APPLICATIONS
Recommended for delicate models, hollow models, and models with thin walls.
•
STEP 1: Carefully break away the Support material from the printed model.
•
STEP 2: Place in the cleaning station with cleaning solution
Soak the printed model in the cleaning station until the Support material dissolves.
Drain all of the liquid from the basket before removing the printed model.
•
STEP 3: Rinse the printed model under running water to remove the cleaning
solution and grid residue.
2. Break-Away and Dissolve