Stratasys J4100 User Guide
4 Operating and Maintaining the Printer
DOC-26000 Rev. C
4-59
After warming the print block and turning on the UV lamps, the printer prints a
frame on the build tray for positioning the scale.
Figure 4-75 Scale positioning frame on the build tray
9. When the “Preparation for Pattern Test” screen appears, open the printer
and tape a sheet of pink paper to the surface left of the build tray, as shown
below.
Figure 4-76 Pattern Test paper positioned next to the build tray
10. Close the printer doors and click
Next
in the wizard screen.
