Strata CIX 200, Programming Manual

Page: 451 / 508

Telephone Button Programming
900 Series Programs
Strata CIX Programming Vol.1 12/09
13-17
T
e
lepho
ne Butt
on
Progra
mming
2. Press Hold to execute.
3. Press Hold again to return to CABINET= prompt.
4. Press # # Hold to return to the PROG= prompt.
5. Enter another program number to continue programming or press # # Hold again to exit programming
mode.
Program Button LEDs
The LED blink pattern indicates the following:
• Red continuous blinking – PCB experienced a Make Busy status error.
• Red continuous illumination – PCB Make Busy Status mode is on.
• Green continuous blinking – PCB Make Busy Status mode is stand by.
• Green intermittent blinking – PCB Make Busy Status mode is idle.
Regional Selection
Set Operating region for your Strata CIX. This assignment sets built-in core LSI hardware parameters that
are not changeable with jumpers or switches. These parameters must be set unique for each country and
affect system operation.
Program Number(s): 915
Prerequisite Program: None
Reference: None
Access Sequence: Select Maintenance > Hardware Info. and Control > CIX Processor
Login to programming mode from your telephone button pad:
Hold Q#Q#1Q2Q3Q.
At the PASSWORD = prompt enter your password and press Hold .
At the PROG = prompt enter 915 and press Hold .
1. Press FB01 . Enter 0~2 . Press Hold .
2. Press Hold (twice).
3. Enter another program number to continue programming or press # # Hold again to exit programming
mode.
Field Description Value LCD Prompt
Region Set region number. 0~2 are valid entries for
North American Operations. 0~31 (USA = 0,
Canada = 1, and
Mexico = 2) REGION=