background image

SPX LED WW LUMINAIRE QUICK START GUIDE

1

02.1704.0010

15 AUGUST 2018

SPX LED WW 

Luminaire

Q

UICK

 S

TART

 G

UIDE

Thank you for purchasing a 

Strand Lighting

 SPX LED WW 

Luminaire. We have designed this luminaire to provide you 

with a superior fitting in performance, design, and 

engineering. We are confident that it will perform to your 

expectations for many years to come.

OVERVIEW

This document provides installation and operation instructions for the following 
product(s):

*excluding shutter and lens tube

Accessories

WARNINGS AND CAUTIONS

Note:  

Installation is entirely at your risk. Do not attempt installation unless you are suitably 

qualified. Contact 

Strand Lighting

 or one of its authorized distributors for assistance.

When using electrical equipment, basic safety precautions should always be followed including the 
following:

Do not use outdoors.

Do not mount near gas or electric heaters.

Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.

The use of accessory equipment not recommended by
the manufacturer may cause an unsafe condition.

Do not use this equipment for other than intended use.

Refer service to qualified personnel.

INSTALLATION AND SETUP

Power Requirements

The SPX LED WW Luminaire requires standard AC power distribution from 100-240VAC, 50/60Hz. 
Power is 295W max, and current varies depending on the voltage. 

IMPORTANT AC POWER CONNECTION NOTES:

Use only approved cable types.

Do not overload circuits!

Connecting Power

Table 1

 describes how to connect power to your SPX LED WW Luminaire.

Part No.

Name

Description

Weight*

Dimensions*

(H x W x L)

12610

SPX LED WW

SPX LED WW - mains or DMX dimmable,

warm white profile luminaire engine

without lens tube

6.2 kg 

[13.67 lb]

414 x 327 x 380 mm

[16.29 in x 12.91 in x 14.72 in]

Part No.

Description

PCT1BE

AC Power Input Cable (39 inches/1 meter), powerCON TRUE1 without AC connector (bare end)

PCT1GP

AC Power Input Cable (39 inches/1 meter), powerCON TRUE1 with Stagepin Connector

PCT1GTL

AC Power Input Cable (39 inches/1 meter), powerCON TRUE1 with Twistlock Connector

PCT1GR  

AC Power Input Cable (39 inches/1 meter), powerCON TRUE1 with Edison Connector

SC

Clamp, Get-a-Grip

82003

Safety cable, black, 1/8 x 30 w/hook

2000851

Reviews: