background image

USING THE HOB (13 AMP PLUG VERSIONS)

13Amp Plug Operation.

Your hob has been designed to allow you to plug into the mains socket and is suit-

able for a variety of installations not possible with conventional electric hobs, such as 

direct replacement for a gas hob without the need to install a 32Amp cooker socket, 

thus eliminating the need for an expensive rewire of the kitchen.

How it works

Each time you operate the hob, the total power level of the hob is calculated.

If the total power requested reaches 2.8kW the energy management system warns 

you that the limit is reached. Signalled by a letter “r” in the zone window (Lasts for 3 

seconds ) and an audible “Beep”. The hob cook zones can be used in any combination 

or setting until the 2.8kw power setting is reached. (See Tables Below)

Any further power increase is not allowed!

To use any new zones requires you to reduce the power of one of the other selected 

cook zones.

 

13 Amp Plug Power Setting Examples

Set Cook Zone

Examples Of Possible Power Setting Combinations

Left Hand Front

9

6

1

6

Off

Left Hand Rear

9

6

3

Off

P

Right Hand Front

1

5

4

4

9

Right Hand Rear

Off

5

P

9

Off

“13 Amp Plug” Power Management Check

Set Cook Zone

Correct Power Setting Check “13 Amp Plug”

Left Hand Front

9

Left Hand Rear

9

Right Hand Front

1

Right Hand Rear

"r" and warning "Beep" when zone is activated

Warning! If you can set a power level on the right hand cook when the other 

zones are set as above. Please switch off and contact customer service for 

advice.

Summary of Contents for SEH600i13AMP

























Reviews: