USING THE HOB
Touch Controls
The touch controls for your induction hob
have been designed to provide you with
fi nger tip control of your hob, providing
accurate and repeatable power settings
for cooking and an easy clean surface
that can be easily wiped over. When a
cook zone is activated the power setting
is displayed for each zone individually.
Important Notice:-
Before switching on the power
supply to this appliance, switch off
any bright lights (such as cooker
hood) and ensure the appliance is
not in direct sunlight,
This is to enable the electronic
controls to calibrate its sensitivity
against natural ambient lighting
(approx 30s).
Failure to observe the above will
result in the hob not functioning
correctly, To rectify remove all
strong lighting sources and re-apply
power
The hob should complete the
calibration procedure satisfactorily
and lighting such as cooker hoods
can be used normaly.
Using the Touch Controls
Use the fl at of your fi nger, not the tip, the
controls respond to touch, so you don’t
need to apply any pressure.
Always ensure the control area is clean,
dry and free from of any objects (e.g.
utensils, tea towels and cloths), spillages
and water may make the controls diffi cult
to operate.
A warning will be activated and will
beep every 10 seconds, to attract your
attention, please remove any objects and
clean the control area as appropriate.
Basic Control Functions
Key Lock
A RED LED indicates when the key lock
is active, to deactivate/activate touch the
Key Lock key for 1s.
The key lock is deactivated when the Red
LED switches off.
If the cook zones are on, the key lock
function locks all the keys except the
ON/OFF.
When all the hob cook zones are off,
the key lock function locks all the keys,
including the ON/OFF key.
The Key Lock is automatically activated
when power is initially applied to the Hob.
