Cleaning the Infuser
NOTE 1: If the infuser is not inserted correctly until it clicks into place and the two red but-
tons have not snapped out, the service door cannot be closed.
NOTE 2: If it is hard to insert the infuser, before inserting it squeeze it to the right size by
pressing it forcefully from the top and bottom simultaneously, as shown in figure 27.
NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the serv-
ice door, unplug from the mains then plug in again.
Wait for all the lights to go off, then open the door and replace the infuser.
•
replace the drip tray, complete with the grounds container;
•
close the service door.
15
Check that the two red buttons have snapped out, otherwise the door cannot be closed.
CORRECT
INCORRECT
The two red buttons
have snapped out
CORRECTLY
The two red buttons
have not snapped out
Support
Pin
Infuser
Push the PUSH symbol fully in
until it clicks into place.
After having heard the click,
check that the red buttons
have snapped out.
Bottom pipe on the infuser.
The pin must be inserted into the bot-
tom pipe on the infuser.
