Using Your Coffee Maker
6 CHANGING THE QUANTITY OF COFFEE IN THE CUP
The appliance is factory preset to automatically deliver the following quantities of coffee:
-
short (when the button is pressed);
- standard (when the button is pressed);
- long (when the button is pressed);
To change these quantities, proceed as follows:
- press the button corresponding to the quantity you want to change ( , or
or
) for at least 8 seconds until the message "PROGRAM QUANTITY" is displayed;
- when the coffee in the cup reaches the required level, press the same button again to
record the new amount.
7 REGULATING THE COFFEE MILL
However, after making the first coffees, if you find that coffee delivery is either too fast or
too slow (in drips), the grinding coarseness regulator can be adjusted (fig. 10).
Turning it 1 click (1 number) clockwise speeds up coffee delivery (without drips).
Turning it 1 click anticlockwise slows down delivery giving a creamier appearance to the cof-
fee.
These adjustments will only be evident after at least 2 cups of coffee have been made.
The grinding coarseness regulator must only be turned when the coffee mill is on.
Turn anticlockwise to obtain finer ground coffee, slower deliv-
ery and a creamier appearance.
Turn clockwise for coarser ground coffee and faster delivery
(not a drop at a time).
Please note:
Coffee has been used to factory test the appliance and it is therefore completely normal for
there to be traces of coffee in the mill. This appliance is however guaranteed to be new.
Figures (i.e. Fig 1) are at the back of the handbook for reference.
11
