STOVES 602SCTC, User Manual

Page: 18 / 24

18
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to
prevent accidental touch of the hot base of the appliance or the risk of electric shock, insert a wooden
isolation plate at least 50mm beneath the base of the hob, unless an oven is installed directly below the
hob.
WARNING: There are ventilation holes around outside of the hob. YOU MUST ensure these holes are
not blocked by the worktop or isolation plate when you put the hob into position.
WARNING:
• Any adhesives used in the construction of the worktop or cabinetry must be able to withstand
temperatures of 150°C to prevent panels becoming unglued.
• The rear wall, adjacent and surrounding surfaces must be able to withstand a temperature of 90°C.
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging).
Fix the hob on the work surface by screwing four brackets on the bottom of hob (see picture), before
installation after placing the appliance in the worktop cutout.
Locate the 4 screw holes (C) on the base of the appliance (D). Attach the 4 retaining brackets (B) to the
base of the appliance (D) using the 4 screws (A), after connecting the connection cable and placing the
appliance into the worktop cut out.
A B C D
Screw Bracket Screw hole Base