12
4. Touch the reset control to silence the alarm.
Note: The minute minder does not switch any of the heating zones off
automatically, and so any heating zones in use will continue to heat up
until switched off manually.
Setting the timer to turn one or more cooking zones off
automatically
1. First touch the heating zone selection control to select the relevant
zone and
use the power slider to select the required power level
.
Then touch the relevant heating zone selection control again so that
the power level indicator for that zone flashes, to show that zone is
currently selected.
2.
While the power level indicator is flashing, touch the timer key. The
timer display will default to “10” flashing.
3.
While the ‘10’ is flashing, use the plus and/or minus keys to set
the required cooking duration time (up to a maximum of 99
minutes).
Note: A short press of the plus or minus key will increase/
decrease the time by 1 minute at a time. A long press of the plus
or minus key will increase/decrease the time by 10 minutes at a
time.
A few seconds after the last touch of the plus or minus key, the
cooking duration time is accepted and starts to count down. A
flashing dot shows next to the power level indicator to indicate
that the heating zone is being controlled by the timer
Summary of Contents for 602SCTC
Page 1: ...1 Stoves 602SCTC Date 01 07 19...
Page 21: ...Please keep this handbook for future reference or for anyone else who may use the appliance 21...
Page 22: ...Please keep this handbook for future reference or for anyone else who may use the appliance 22...
Page 23: ...Please keep this handbook for future reference or for anyone else who may use the appliance 23...