STOVES 602SCTC, User Manual

Page: 13 / 24

13
4. To change or cancel the cooking duration time, please follow the below instructions:
To modify:
1. Select the relevant heating zone by touching the relevant zone selection control key.
2. While the current power level figure is flashing, touch the timer key.
3. The timer display shows the current time remaining flashing.
4. While the current time remaining figure is flashing, use the plus and/or minus keys to set the
required cooking duration time (up to a maximum of 99 minutes).
Note: A short press of the plus or minus key will increase/decrease the
time by 1 minute at a time. A long press of the plus or minus key will
increase/decrease the time by 10 minutes at a time.
A few seconds after the last touch of the plus or minus key, the
amended cooking duration time is accepted and starts to count down.
To cancel:
Select the relevant heating zone by touching the relevant zone selection control key.
While the current power level figure is flashing, touch the timer key.
The timer display shows the current time remaining flashing.
While the current time remaining figure is flashing, touch the plus and minus keys together until the
timer display shows ‘00’
The flashing dot next to the power level indicator goes out, to indicate that the timer function has
been cancelled.
Note: The heating zone will continue to heat and would need to be switched off manually.
5. A few seconds after the last touch of the plus or minus keys , the cooking
duration time is accepted and starts to count down.
If you wish to control more than one zone with the timer, then please
repeat the above steps for each of the cooking zones that you wish to turn
off automatically.
When the cooking duration time has elapsed, the relevant cooking zone
will be switched off automatically.