The
Gas Consumer Council (GCC)
is
an independent organisation which
protects the interests of gas users. If
you need advice, you will find the
telephone number is your local
telephone directory under Gas.
If the ignition fails:
•
Check there is a spark when the
ignition button is depressed.
•
If there is no spark, check that the
electricity supply is switched on at
the socket.
•
Check that the gas supply is
switched on.
To replace an oven light bulb
Caution:
Switch off the electricity
supply to the appliance at the socket,
to avoid the risk of electric shock.
Wait until the oven is
cool
, then
remove the oven shelves.
Grasp the lens cover on the light fitting
and pull it away from the side of the
oven. Unscrew the bulb.
Please note that the oven light bulb is
not covered by the guarantee.
Replacement bulbs can be ordered
from your local supplier, or bought
from a hardware store.
Environmental Protection
We are committed to protecting the
environment and operate an
Environmental Management System
which complies with BS EN ISO
14001:1996.
Disposal of packaging
•
All our packaging materials are
recyclable and environmentally
friendly.
•
Please help us to protect our
environment by disposing of all
packaging in an environmentally
friendly manner.
•
Please contact your local authority
for the nearest recycling centre.
Caution:
Packaging materials can
pose a risk of suffocation - keep away
from children.
4
INTRODUCTION
Step 4: Fitting door handles
1. Remove handle screws from
assembly.
2. Place screws through door.
3. Place spacer, washer and pillar
over screw.
4. Screw handle in place. Take care
not to over tighten.
Important:
DO NOT lift the appliance
by the door handle.
Step 5: Commissioning
Burner aeration
All burners have fixed aeration and no
adjustment is possible.
Pressure setting
G20 Natural Gas @ 20 mbar
G30 Butane @ 28 mbar
G31 Propane @ 37 mbar
Ignition
All burners are ignited by pressing the
ignition switch on the fascia. When
the burner has lit release the ignition
switch. Turn the tap to the
FULL ON
position, wait a second before
pressing the ignition switch.
Before leaving the installation
1. Place all the loose parts of the
cooker into position.
2. Show the customer how to operate
the cooker and give them this
handbook.
Thank you.
29
INSTALLATION INSTRUCTIONS
Handle
Screw
Door
Spacer
Washer
Pillar
Handle
Summary of Contents for 1200DFa
Page 2: ......
