Figure
1
:
hood controls:
The controls work as follows:
A - Neon light
B - Off
C - Position 1
D - Position 2
E - Position 3
F - Automatic stop timer
Booster function
This hood also has a booster function.
To activate the booster, press button E
while the hood is in use and it will
increase speed for 20 seconds, before
slowing down again.
We recommend that you switch on the
hood for a few minutes before you
start cooking, and then leave it running
for approximately 15 minutes after-
wards to ensure that all odours are
extracted.
To illuminate the cooking area under-
neath the hood, push the light control
button in to the “on” position.
T o
switch off,
press again to return to the
“off” position.
To operate the hood, press the button
for the required speed - select:
1
low,
2
medium, or
3
high speed. The
neon indicator light will light up to
show when the fan is operating.
To
switch off
, press the “off” button.
Important safety notes
•
Keep hob rings covered with pans
when switched on to avoid dam-
aging the hood. The use of an
unprotected flame can cause a fire
hazard.
•
Do not
flambé food underneath
the hood.
•
When frying foods, take care to
avoid cooking oil flares.
•
Wash the grease filters regularly -
refer to the cleaning section.
•
Do not
check filters while the hood
is in use.
•
Do not
touch the lamps after
prolonged use of the appliance.
Re-circulation method only:
•
Keep the air ducting vents clear of
obstruction.
•
Change the carbon filters every 4
months.
3
Using the Hood
Figure 1
0
1
2
3
A
B
C
E
D
F
T
