Preparation
Instructions for use • C-MAC Monitor • NDQ566_EN_V1.0_02-2021_IFU_CE-MDR
21
5.6 Switching on the monitor
Press the
On/Off
button to switch the monitor on.
ð
The green operating pilot lamp illuminates.
ð
The monitor is switched on.
5.7 Inserting the SD card
ü
Before using with the C-MAC monitor, the SD card must be formatted on a PC with FAT
(standard).
ü
The SD card has only one partition.
ü
The C-MAC monitor is switched off.
1.
Insert the SD card into the C-MAC monitor in the correct position.
2.
Switch on the C-MAC monitor.
ð
The C-MAC monitor’s status bar displays the available memory capacity of the SD card.
NOTICE
Data transmission fault
If the SD card or connecting cable is removed during image/video capture, this can result in
data loss.
Ensure that the SD card and connecting cable are connected to the device during
capture.
