Preparation
Instructions for use • C-MAC Monitor • NDQ566_EN_V1.0_02-2021_IFU_CE-MDR
18
5.3.1 Connecting the power supply unit
NOTICE
Damage due to incompatible charger
The product may be damaged if an incompatible charger is used.
Only use chargers supplied by KARL STORZ.
1.
Insert the connector for the power supply unit into the socket on the monitor.
2.
Secure the connector using the swivel nut.
3.
Plug the power supply unit into the wall socket, holding onto the plug housing, not the
cable itself.
ð
The monitor is connected to the power supply.
ð
The green indicator on the power supply unit lights up.
ð
The orange status LED lights up.
ð
The battery charges.
5.3.2 Replacing the charging/power supply unit adaptor
The charger's power supply unit can be adapted to country-specific power sockets using
interchangeable adaptors.
1.
Press the button on the charger power supply unit to change the adaptor.
ð
This releases the adaptor, which can then be pushed out.
