Preparation
Instructions for use • LED Headlight KS70 • MVZ182_EN_V1.0_03-2021_IFU_CE-MDR
13
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
5.2 Inspecting the product
1.
Inspect products for visible contamination. Do not use contaminated products.
2.
Inspect the products for the following characteristics:
–
Good working order
–
Functionality
–
Correct assembly of the components
–
Completeness
Inspect the product for damage, e.g.:
–
Rough surfaces
–
Sharp corners
–
Burred edges
–
Protruding parts
5.3 Assembling the product
1.
Place the forehead cushion with press fasteners onto the inside of the headband and
close the press fasteners.
2.
Insert the charged batteries into the battery pack.
3.
Adjust the size and fit of the headband using both rotary knobs.
4.
Set the orientation of the LED light and the diameter of the illuminated field using the
rotating ring on the lamp head.
