StormRed GIANT, User Manual

Page: 11 / 46

11
Display
Function buttons
MODE - Press the button to select the function. Hold the button to reset the values.
SET - To set time, distance, heart rate and calories outside of scanning mode.
RESET - Press the button to reset time, distance and calories. If you hold the RESET
button for a long time, all data except the ODO value is reset.
Functions and operation
SCAN: Press the "MODE" button until "SCAN" is displayed. The display will alternate
between all functions/values: time, speed, distance, calories, ODO (in 5 second
increments).
TIME : Displays the total time from the start to the end of the exercise.
Press the "MODE" button until "TIME" is displayed, press the "SET" button to set the
exercise time. When "SET" is set to zero, the computer will sound the alarm for 10
seconds.
SPEED : Display the current speed.
DIST: Displays the distance from the start to the end of the exercise.
Press the "MODE" button until "DIST" is displayed, press the "SET" button to set the
exercise distance. When "SET" is set to zero, the computer will sound the alarm for 10
seconds.
CALORIES : displays the total calories from the beginning to the end of the exercise.
Press the "MODE" button until "CAL" is displayed, press the "SET" button to set the
calorie during exercise. When "SET" is at zero, the computer will sound the alarm for 10
seconds.
ODO : Total distance travelled - adds up all exercises since the batteries were inserted
into the computer.
ALARM : The computer "beeps" when you press the "MODE", "SET" and "RESET" buttons.
AUTO ON/OFF & AUTO START/STOP: Without a signal for 4 minutes, the display will
automatically turn off. As long as the bike is in motion or any button is pressed, the
monitor is in action.