![background image](http://html.mh-extra.com/html/storm/ez-key/ez-key_technical-manual_1382788006.webp)
EZ-Key Keypad with integrated audio
Technical Manual
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is
confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of
Keymat Technology Ltd., Copyright 2015. All rights reserved.
EZ-Key + Audio - Technical Manual Rev 1 Apr 2015
www.storm-interface.com
Page 6 of 35
Using the Windows Utility to change USB Codes
System Requirements
The utility requires .NET framework to be installed on the PC and will communicate over the same usb connection
but via the HID-HID data pipe channel, no special drivers are required.
Compatability
Windows 8
Windows 7
Windows Vista
Windows XP
Only if you install .NET framework
Windows ME and earlier
Not investigated
The utility can be used to configure the product for:
•
LED On/Off
•
LED brightness (0 to 9)
• Beeper
On/Off
•
Beeper Duration ( ¼ to 2 ¼ seconds)
•
Load customised keypad table
•
Write default values from volatile memory to flash
•
Reset to factory default
• Load
Firmware