b. Clip the bracket to the appropriate place on the front of the mounting rail.
Figure 2-14: Clipping the plastic bracket to the front of the rail
Figure 2-15: Rails fronts with all four brackets attached
5. Attach the rear slide of the left rail to the rack nuts by sliding the large part of the mounting hole over the
rack nut and then pressing outward to seat the nut in the small part of the mounting hole.
Figure 2-16: Attaching the mounting rail in back
Chapter 2: Getting Started
Nexsan E48X and Nexsan E60X
Installation Guide
Nexsan
31
2
