StorageWorks Wide Expansion Storage Pedestal
Index–2
Order Number: EK–SMCPC–UG. A01
slots, 1–5
status, 4–1
pedestal-to-host connection (diagram), 2–4, 3–6
personality module, 1–4, 5; 4–11, 12
power cable connection, 2–6
power cords, 2–7
power supply
codes, 4–2
LEDs, 4–1
R
rear bezel see bezel removal
reconfiguring pedestal for two SCSI buses, 3–5
redundant cooling, 1–2, 5; 4-11, 12
redundant power option, 1–2
redundant power supply, 1–4, 5; 2–6
removable filler tab, 2–5
removal of storage device, 4–5
replacement of blower, 4–8
replacement of storage device, 4–5
replacing a pedestal BBU, 4–7
replacing a pedestal power supply, 4–6
replacing a storage SBB, 4–5
reshipment, 2–1
routing SCSI cable, 2–4, 5, 6
S
SCSI, 1–1
cables and connectors, 2–1, 2, 3
connector securing mechanisms, 2–2
device addresses, 1–5, 3–2
SCSI "P"
cable, 2–1, 2, 3
cable connections, 2–3
SCSI bus, 2–4, 3–4
configuration rules, 3–4
bus length inside pedestal, 3–5
SCSI drive
3.5-inch, 1–1
5.25-inch, 1–1
securing mechanisms, 2–2
setting address of storage devices, 3–3
shipping containers, 2–1
side mounted tabs, 1–2
single power supply status LEDs, 4–2
small computer system interface see SCSI
status indicator LEDs, 1–2
storage array, 1–1
storage device, 1–1, 1–2
configuration rules, 3–3
device addresses, 3–2, 3
installation, 2–8
status LEDs, 4–5
storage pedestal SCSI connectors, 2–4, 3–6
switchbank, 1–4; 3–2, 3
T
target IDs, 1–5
troubleshooting the pedestal, 4–11
typical pedestal configuration, 1–3
V
visual fault indicators,
1–2, 4; 4–1, 2, 3, 4, 5, 10, 11
