StorageTek 9714, Hardware Operator'S Manual

Page: 36 / 76

Power Switch
2-8 Eighth Edition 95698
■
Power Switch
The power switch is an
ON/OFF
switch located in the bottom of the rear cover of
the LSM, as shown in Figure 2-5 . To power on the LSM, press the switch to the
ON position to supply power to the robot and the drives. To power off the LSM,
make sure that all jobs being performed by the robot and the drives are complete,
then press the switch to the OFF position to remove power from the robot and the
drives.
Figure 2-5. Power Switch Location
C61015
POWER
SWITCH
REAR OF 9714