IP Camera User Manual
IP Camera SON-IPC1
Version 1.0
Page 9
2.4
Click “Manually Set” to set the IP
addresses. This operation makes
the IP address static.
The local or “Inner access” address
can be used to access your IP
camera on the local network, via a
Web browser. Make a note of this
address. It will be in a format
similar
to
this:
http://192.168.1.126:81
NB If you wish, you can click the
test connectivity to your IP camera
by clicking the “Open” button.
This will open your default Web
browser (e.g. Internet Explorer /
Firefox), from which you will be
able to view the video stream from
your IP camera.
2.5
Check the IP addresses for gateway
and DNS server agree with those
for your network. You can change
the IP of the camera if you wish.
NB It is preferable to put the port
on 81 in the event you need to use
“port forwarding” in your router.
If you plan to install more cameras
and need to use “port forwarding”
you would need to put each
camera on a different port.
Click OK, confirm the user name
and password, and the camera will
reboot.
IMPORTANT:
Wireless connectivity can only be
set through a web browser. Refer
to
the
“WEB
BASED
MANAGEMENT” section for more
information.
