Page 10
4.3 – Frequently Used Functions
Record:
To record, click “
” or “
” → “
” to go to the “Record Setting” page.
In the “Record Setting” page, you can set the following items:
Record type
Pre / post-event record time (0~10 seconds)
Record time setting
Record path
Note:
The record function will be disabled when the reserved disk capacity in “Reserved(MB)” is larger than the
current disk capacity in “Free(MB)”.
When “Manual” is checked, click “
” or “
” on the main control panel to start the manual recording
immediately, and the recordings will be saved in the location specified in “Record Path”. When “Motion” and / or
“Alarm” are checked, the recording function will be enabled for any motion or alarm event, and the recordings will
be saved in the location specified in “Record Path”.
You can also set a recording schedule from the “Record Setting” page, by setting colour coded blocks of time.
Schedule:
Alarm:
Motion:
Summary of Contents for Ip camera Pro
Page 28: ...Page 28...
